#UNITRONICS OPLC SET INCREMENT MODE OFFLINE#

Offline - the siren is not connected to the hubīattery Charge Battery level of the device. Online - the siren is connected to the hub

We recommend installing the siren in places with the signal strength of 2-3 barsĬonnection Connection status between the hub and StreetSiren DoubleDeck: Jeweller signal strength Signal strength between the hub and siren. Temperature Siren temperature, which is measured on the processor and changes gradually. Select StreetSiren DoubleDeck from the list.Siren states can be found in the Ajax app: You can view them in the Ajax app, in the Devices menu Icons display some of the StreetSiren DoubleDeck states. Note: Up to 10 sirens can be connected to one hub. Updating device statuses in the list depends on the ping time depened in Jeweller settings. The connected siren will appear in the list of hub devices in the app. If StreetSiren DoubleDeck has already been assigned to another hub, turn off the siren and follow the standard addition procedure. There is no need to deactivate the device to retry the connection. StreetSiren DoubleDeck shuts down automatically 6 seconds after turning on if it failed to connect to the hub. You can use a thin, hard object, like a pencil, to press.įor detection and pairing to take place, StreetSiren DoubleDeck must be within the hub’s radio communication range, i. Note: The power button is recessed into the body and is tight to press. Keep in mind that the hub connection request is only sent when the siren is turning on. Turn on StreetSiren DoubleDeck by holding the power button for 3 seconds.

#UNITRONICS OPLC SET INCREMENT MODE CODE#

Name the device, scan or type the QR code (located on the body and packaging), and select the location room.

Go to the Devices tab in the Ajax app and click Add Device.

Note: Only users with administrator rights can connect the StreetSiren DoubleDeck to the hub.

Make sure that the hub is disarmed and is not starting updates.

The status of the Internet connection is available in the Ajax app and is also indicated by the color of the hub’s logo (lights white or green).

Make sure that the hub is on and has Internet access.

Add a hub to the app and create at least one room.

The tamper button is triggered when the device body is opened/broken, and the accelerometer is triggered when somebody’s attempting to move or dismantle the device. The siren is equipped with a tamper button and an accelerometer. Also, if the system is armed, the power button is blocked, preventing the siren from being turned off. When installed properly, it is hard to dismount and disconnect an activated siren: its body is robust, the buzzer protected, and power is from the bundled batteries, so the siren will continue to work even if there is a power outage at the object. These functions will be useful when controlling the security system using SpaceControl or KeyPad (the siren reminds you of disarming when you enter the object).

The siren uses LED indication to notify that the object is armed, as well as uses sound and LEDs to notify about the delay when entering/leaving.

Serves as a security status indicator.

The device responds to triggering of the tamper and security system alarms in less than a second, including a siren and LED backlight, which scares off intruders and attracts the attention of neighbors.

Unitronics oplc set increment mode